TM-5-2350-378-24-P
HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
TM-5-2350-378-24-P - Page 556 of 790
TM 5--2350--378--24&P
0029 00--1
REPLACE WIRING HARNESS W2
0029 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0071 00, item 7)
Materials/Parts
Tie down straps (A/R) (WP 0070 00, item 10)
Personnel Required
Two 62B10
Equipment Conditions
Vehicle MASTER power OFF (TM 5--2350--262--10)
Apronlockedinfu
l
l-
-uppos
it
ion
(TM 5--2350--262--10)
Ejector to front of vehicle (TM 5--2 350--262--10)
REMOVAL
WARNING
S
Do not operate ejector when personnel are in bowl. Do not work in bowl unless
ejector lock is engaged. Failure to comply may result in severe injury or death to
personnel.
S
Do not stand or work in bowl area unless ejector lock is engaged. Do not stand in
bowl to observe roller guide travels. Failure to comply may result in severe injury
or death to personnel.
S
When folding dozer blade, work on blade latches from side of vehicle only. Do not
stand In front of dozer blade while retracting ejector. Failure to comply may result
in severe injury or death to personnel.
Back to Top
