TM-5-2350-378-24-P

HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

TM-5-2350-378-24-P - Page 563 of 790

TM 5--2350--378--24&P

0030 00--2

REPLACE WIRING HARNESS W3 -- Continued

0030 00

REMOVAL -- CONTINUED

1.

Remove dust cap (Figure 1, item 5), four screws (Figure 1, item 4), nutplate (Figure 1, item 1), and wiring

harness W3 connector J1 (Figure 1, item 2) from HDC disconnect bracket (Figure 1, item 3).

2.

Remove wiring harness W3 connector P5 (Figure 1, item 7) from transducer T5 (Figure 1, item 6) at forward

right actuator #1 (Figure 1, item 8).

3.

Remove wiring harness W3 connector P31 (Figure 1, item 10) from transducer T6 (Figure 1, item 11) at

forward left actuator #1 (Figure 1, item 9).

Figure 1. Removing Wiring Harness W3 From Disconnect Bracket And Actuator Area