TM-5-2350-378-24-P
HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
TM-5-2350-378-24-P - Page 570 of 790
TM 5--2350--378--24&P
0031 00--3
REPAIR HDC FORWARD LEFT MANIFOLD ASSEMBLY -- Continued
0031 00
DISASSEMBLY
CAUTION
S
Disassembly should be performed in a clean environment and protective dust cov-
ers or caps should be installed on all openings to prevent contamination. Dirt can
damage parts and cause malfunctions.
S
When securing forward left manifold in vice, exercise extreme care not to mar any
surfaces or damage components
1.
Remove two adapters (Figure 2, item 3), two o--rings (Figure 2, item 4), two adapters (Figure 2, item 13), two
o--rings (Figure 2, item 14), adapter (Figure 2, item 11), o--ring (Figure 2, item 12), adapter (Figure 2, item 17),
o--ring (Figure 2, item 16), two adapters (Figure 2, item 1), and two o--rings (Figure 2, item 2) from left forward
manifold (Figure 2, item 15). Discard o--rings.
2.
Remove two two--way (NO) valves V3 and V9 (Figure 2, item 10), two teflon backups (Figure 2, item 7), two
o--rings (Figure 2, item 8), two teflon backups (Figure 2, item 7), two o--rings (Figure 2, item 9), transducer
T10 (Figure 2, item 6), and o--ring (Figure 2, item 5) from left forward manifold (Figure 2, item 15). Discard
o--rings and telfon backups.
Figure 2. Disassembly of HDC Forward Left Manifold
END OF TASK
Back to Top
