TM-5-2350-378-24-P

HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

TM-5-2350-378-24-P - Page 575 of 790

TM 5--2350--378--24&P

0032 00--2

REPAIR HDC FORWARD RIGHT MANIFOLD ASSEMBLY -- Continued

0032 00

REMOVAL -- CONTINUED

CAUTION

Cap or plug all oil port and ends of hoses and tubes when oil hoses or tubes are

disconnected or removed to prevent contamination. Failure to comply may result in

damage to equipment.

1.

Remove five hydraulic hoses (Figure 1, item 1) and three hydraulic tubes (Figure 1, item 2) from forward right

manifold (Figure 1, item 3).

2.

Remove wiring harness W3 connectors P2 and P10 (Figure 1, item 7) from two two--way (NO) valves V2 and

V10 (Figure 1, item 6), and wiring harness W3 connector P11 (Figure 1, item 9) from transducer T11

(Figure 1, item 8).

3.

Remove two self--locking screws (Figure 1, item 5), two flat washers (Figure 1, item 4), and forward right

manifold (Figure 1, item 3) from vehicle. Discard screws.

Figure 1. Removing HDC Forward Right Manifold

END OF TASK