TM-5-2350-378-24-P

HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

TM-5-2350-378-24-P - Page 582 of 790

TM 5--2350--378--24&P

0033 00--3

REPAIR HDC AFT MANIFOLD ASSEMBLY -- Continued

0033 00

DISASSEMBLY

CAUTION

S

Assembly should be performed in a clean environment and protective dust covers

or caps should be installed on all openings to prevent contamination. Dirt can

damage parts and cause malfunctions.

S

When securing aft manifold in vice, exercise extreme care not to mar any surfaces

or damage components

1.

Remove adapter (Figure 2, item 11), two adapters (Figure 2, item 10), two o--rings (Figure 2, item 9), two

adapters (Figure 2, item 13), two o--rings (Figure 2, item 12), plug (Figure 2, item 8), o--ring (Figure 2,

item 7), two adapters (Figure 2, item 5), and two o--rings (Figure 2, item 6) from aft manifold (Figure 2,

item 14). Discard o--rings.

2.

Remove four two--way (NO) valves V4, V6, V7, and V8 (Figure 2, item 1), one two--way (NC) valve,

(Figure 2, item 15), five teflon backups (Figure 2, item 3), five o--rings (Figure 2, item 4), five teflon backups

(Figure 2, item 3), and five o--rings (Figure 2, item 2) from aft manifold (Figure 2, item 14). Discard o--rings

and teflon backups.

Figure 2. Disassembly of HDC Manifold Assembly

END OF TASK