TM-5-2350-378-24-P
HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
TM-5-2350-378-24-P - Page 576 of 790
TM 5--2350--378--24&P
0032 00--3
REPAIR HDC FORWARD RIGHT MANIFOLD ASSEMBLY -- Continued
0032 00
DISASSEMBLY
CAUTION
S
Disassembly should be performed in a clean environment and protective dust
covers or caps should be installed on all openings to prevent contamination. Dirt
can damage parts and cause malfunctions.
S
When securing forward right manifold in vice, exercise extreme care not to mar any
surfaces or damage components
1.
Remove two adapters (Figure 2, item 4), two o--rings (Figure 2, item 3), two adapters (Figure 2, item 11), two
o--rings (Figure 2, item 10), adapter (Figure 2, item 13), o--ring (Figure 2, item 12), adapter (Figure 2, item 7),
o--ring (Figure 2, item 8), two adapters (Figure 2, item 6), and two o--rings (Figure 2, item 5), from right
manifold (Figure 2, item 9). Discard o--rings.
2.
Remove two two--way (NO) valves V2 and V10 (Figure 2, item 14), two teflon backups (Figure 2, item 16),
two o--rings (Figure 2, item 17), two teflon backups (Figure 2, item 16), two o--rings (Figure 2, item 15),
transducer T11 (Figure 2, item 1), and o--ring (Figure 2, item 2) from right manifold (Figure 2, item 9).
Discard o--rings and teflon backups.
Figure 2. Disassembly of HDC Forward Right Manifold
END OF TASK
Back to Top
