TM-5-2350-378-24-P

HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

TM-5-2350-378-24-P - Page 547 of 790

TM 5--2350--378--24&P

0027 00--2

REPLACE HDC CIRCUIT BREAKER AND POWER DISTRIBUTION COMPONENTS --

Continued

0027 00

REMOVAL -- CONTINUED

1.

Remove two self--locking screws (Figure 1, item 2), two flat washers (Figure 1, item 1), and disconnect

bracket (Figure 1, item 9) from bulkhead. Discard self--locking screws.

2.

Disconnect circuit 10 (Figure 1, item 4) and circuit 1070 (Figure 1, item 3) connectors from HDC circuit

breaker (Figure 1, item 7).

3.

Remove two nuts (Figure 1, item 5), two lockwashers (Figure 1, item 6), two screws (Figure 1, item 8), and

HDC circuit breaker (Figure 1, item 7) from HDC disconnect bracket (Figure 1, item 9). Discard lockwashers.

Figure 1. Removing HDC Circuit Breaker