TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 191 of 894

TRUCK SERVICE MANUAL

BRAKES-AIR

certain that it is in fully released position. To do this,

disconnect the push rod at the slack adjuster.

If push

rod moves toward (release) the brake chamber, turn

the worm shaft and rotate the slack adjuster toward

the push rod until the clevis pin can be reinstalled.

2.

Disengage locking sleeve on worm shaft or adjusting

screw by depressing the spring loaded sleeve with

open or box end wrench (Fig. 6).