TM-5-3990-263-13-P
PALLET, ADAPTER, BRIDGE, M15
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
APRIL 2012
TM-5-3990-263-13-P - Page 323 of 728
OPERATOR MAINTENANCE
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INITIAL SETUP:
Materials/Parts
Rags, Wiping (WP
0081, Table 1, Item 21)
References
TM 9-2320-425-10 (WP
0076)
TM 9-2320-435-10 (WP
0076)
Equipment Condition
Vehicle PMCS performed (TM 9-2320-425-10 or
TM 9-2320-435-10). (WP
0076)
Table
1.
Operator Preventive Maintenance Checks and Services
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
WARNING
Check for overhead power lines or other ob-
structions before attempting operation of
LHS. LHS reaches a height of 22 ft 2 in. (6.7
m) and could contact power lines. Failure to
comply may result in serious injury or death
to personnel.
NOTE
Perform Operator's Before PMCS checks if:
•
You are assigned operator but have not
operated machine since last PMCS was
performed.
•
You are operating machine for first time.
•
Lubrication order is to be used in
conjunction with PMCS.
1
Before
Vehicle
Start vehicle. Refer to TM 9-2320-425-10 or TM
9-2320-435-10.
2
Before
Load Handling
System (LHS)
Controls
Check for proper operation of LHS MODE SELECT
switch (Figure 1, Item 1) and joystick (Figure 1, Item 2).
Verify by placing LHS MODE SELECT switch (Figure 1,
Item 1) in AUTO position.
LHS will not operate.
TM 5-3990-263-13&P
0035
0035-1
Back to Top
