TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 325 of 728

Table

1.

Operator Preventive Maintenance Checks and Services - Continued

ITEM

NO.

INTERVAL

ITEM TO BE

CHECKED OR

SERVICED

PROCEDURE

EQUIPMENT

NOT READY/

AVAILABLE IF:

Turn LHS MODE SELECT switch (Figure 1, Item 1) to

OFF. LHS ENGAGED indicator (Figure 1, Item 5) light

will go out.

Set PTO ENGAGE switch (Figure 1, Item 3) in OFF.

Ensure indicator light (Figure 1, Item 4) goes off.

Turn vehicle off. Refer to TM 9-2320-425-10 or TM

9-2320-435-10.

3

Before

Leaks

Check underneath vehicle for evidence of obvious fluid

leakage. If leakage is detected, further investigation is

needed to determine location and cause of leak. If there

is any doubt, contact your supervisor or Field

maintenance.

Any Class III leak is

evident.

4

Before

Dust Covers

Check to see if dust covers (Figure 2, Item 1) are present

and installed on winch hose quick disconnect couplings

(Figure 2, Item 2).

2

2

1

Figure 2.

Dust Covers.

5

Before

BAP Winch

Assembly and

Cable Tensioner

Check winch (Figure 3, Item 1) for obvious damage and

loose or missing hardware.

Hardware is missing.

TM 5-3990-263-13&P

0035

0035-3