TM-5-3990-263-13-P
PALLET, ADAPTER, BRIDGE, M15
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
APRIL 2012
TM-5-3990-263-13-P - Page 333 of 728
Table
1.
Operator Preventive Maintenance Checks and Services - Continued
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
Position HIGH IDLE switch (Figure 13, Item 7) to ON.
Engine rpm should increase audibly. Turn HIGH IDLE
switch (Figure 13, Item 7) to OFF.
Position remote control HOOK ARM switch (Figure 13,
Item 8) to UNLOAD until hook arm cylinders (Figure 13,
Item 9) are extended approximately 6 inches (15 cm).
Position remote control MAIN FRAME switch (Figure 14,
Item 10) to UNLOAD and release when main frame is
extended fully. Ensure main frame extends fully.
8
10
Figure 14.
Main Frame Switch.
Position HOOK ARM switch (Figure 15, Item 8) to
UNLOAD and release when winch cable hook (Figure
15, Item 11) can be reached from ground.
TM 5-3990-263-13&P
0035
0035-11
Back to Top
