TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 330 of 728

Table

1.

Operator Preventive Maintenance Checks and Services - Continued

ITEM

NO.

INTERVAL

ITEM TO BE

CHECKED OR

SERVICED

PROCEDURE

EQUIPMENT

NOT READY/

AVAILABLE IF:

2

2

1

1

Figure 9.

Rear Guide Assemblies.

12

Before

Transload

Rollers

Inspect transload rollers (Figure 10, Item 1) and

extension cylinders (Figure 10, Item 2) for damage and

freedom of movement.

Transload rollers are

damaged or will not move

freely.

1

2

1

2

Figure 10.

Transload Rollers.

13

During

BAP Air Lines,

Hoses, and

Fittings

Check air lines, hoses, and fittings for leaks, dents,

cracks, and kinks.

14

During

BAP Winch

Assembly

Check winch cable (Figure 11, Item 1) for broken wires

and kinks. If in doubt, notify field level maintenance.

Winch cable has more

than three broken wires

per 3 in (7.62 cm) section

on same strand Maximum

number of broken wires

shall not occur in any two

consecutive 3 in (7.62 cm)

TM 5-3990-263-13&P

0035

0035-8