TM-5-5420-202-20-2
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4
OCTOBER 1985
TM-5-5420-202-20-2 - Page 191 of 734
TM 5-5420-202-20-2
ENGINE ACCESS COVERS (LEFT BANK) REPLACEMENT (Sheet 5 of 5)
8.
9.
10.
11.
Position new gasket (G) and cap assembly
(H) to front engine access cover (J).
Install two screws (K) and washers (L)
to secure cap assembly (H) to front engine
access cover (J).
Using socket, tighten screws (K).
Position front engine access cover (J) and
cap assembly (H) in place on engine.
15.
16.
17.
18.
End
Install four screws and washers (P) to se-
cure plate with electrical connectors (N).
Using socket, tighten screws (P).
Install engine shroud (page 9-3 1).
Install powerplant (page 5-14).
of Task
12. Install nine screws and washers (M) to
secure front engine access cover.
13. Using socket, tighten screws (M).
14. Position plate with electrical connectors
(N) on engine.
6-116
Back to Top
