TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

  TM-5-5420-202-20-2 - Page 184 of 734

TM 5-5420-202-20-2
ENGINE ACCESS COVERS (RIGHT BANK) REPLACEMENT (Sheet 3 of 5)
7.
Using socket, remove three screws, washers
and clamp (G) securing timing access cover
(H) to engine.
8.
Remove timing access cover (H).
NOTE
Use a suitable container or rags to catch
fuel leakage when any fuel line or fitting
is loosened or disconnected.
9.
10.
11.
12.
Go on to Sheet 4
Using 9/16 inch wrench, disconnect fuel
return hose fitting (J) from nipple (K).
Using 11/16 inch wrench, remove nut
(L) securing nipple (K) to access cover (M).
Pull nipple (K) with hose attached out of
access cover. (Pull nipple and hose toward
rear of engine).
Using socket and extension, remove
three screws and washers (N).
Remove access cover (M).
13.
6-109


Back to Top