TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

  TM-5-5420-202-20-2 - Page 179 of 734

TM 5-5420-202-20-2
MULTIPLE FLUID PRESSURE LINE CONNECTOR REPLACEMENT (Sheet 4 of 6)
3.
Connect hose (D) to connector (A).
4.
Using 1 inch wrench, tighten hose connector
(D). Make sure connector (A) is installed
with hose fittings pointed down.
7.
Position hose (F) so that free end passes
through right engine shroud. Using fingers
and flat-tip screwdriver position grommet (G)
over hose and into shroud.
5.
Connect hoses (E) and (F) to connector (A).
6.
Using 11/16 inch wrench, tighten connectors
(E) and (F).
Go on to Sheet 5
6-104


Back to Top