TM 5-5420-202-20-2
MULTIPLE FLUID PRESSURE LINE CONNECTOR REPLACEMENT (Sheet 3 of 6)
8.
9.
10.
11.
Using 1/2 inch socket, remove loop clamp
(K) that secures left hose (L) to engine
shroud.
Using 1/2 inch socket, remove loop clamp
(K) that secures right hose (M) to engine
shroud.
Remove hose grommets from left and
right side engine shrouds.
Remove hoses (M) and (L) to inside.
INSPECTION:
1.
Check hoses for cracks, holes and leaks.
2.
Check hose connectors for stripped threads
and wear.
3.
Check loop clamps for serviceability.
4.
Replace parts as needed.
INSTALLATION:
1.
Position connector (A) in engine shroud
(B).
2.
Using 1-1/8 inch deep well socket,
secure connector (A) with flat washer
and retaining nut (C).
Go on to Sheet 4
6-103