TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

  TM-5-5420-202-20-2 - Page 185 of 734

TM 5-5420-202-20-2
ENGINE ACCESS COVERS (RIGHT BANK) REPLACEMENT (Sheet 4 of 5)
INSTALLATION:
1.
Position access cover (A) in place on engine.
2.
Install three screws and washers (B) to secure
access cover.
3.
Using socket and extension, tighten three
screws (B).
4.
Install nipple (C) with hose attached in access
cover (A).
5.
6.
Install nut (D) onto nipple (C). Using 11/16 inch open end wrench, tighten nut (D).
Connect fuel return hose fitting (E) to nipple (C). Using 9/16-inch open end wrench,
tighten hose fitting (E).
7.
Position timing access cover (F) in place
on engine.
8.
Install three screws and washers (G) to
secure timing access cover (F) and hose
clamp on engine.
Using socket, tighten
three screws (G).
Go on to Sheet 5
6-110


Back to Top