TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 175 of 734

TM 5-5420-202-20-2

CRANKCASE BREATHER TEE AND REAR TUBE REPLACEMENT (Sheet 6 of 6)

NOTE

Perform step 11 through 15 only if your vehicle is equipped

with a 2DA engine.

11.

12.

13.

14.

15.

16.

17.

18.

Install new hose (Q) and clamps (R) onto engine breather tube extension (S).

Install end of engine breather tube extension (S) into hose (M). Install hose end of breather

tube extension (S) onto left ejector tube (T).

Slide clamps (R) and (N) over hoses (M) and

(Q). Using screwdriver, tighten clamps (R)

and (N).

Install clamp (U) onto engine breather tube

extension (S).

Using two wrenches, install screw and

new self-locking nut (V) to secure clamp

(U) to bracket on left ejector tube (T).

Install rear engine cooling fan (page 9-57).

Install transmission shroud (page 9-6).

Install top deck (page 16-23).

End of Task

6-100.2

Change 1