TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 180 of 734

TM 5-5420-202-20-2

MULTIPLE FLUID PRESSURE LINE CONNECTOR REPLACEMENT (Sheet 5 of 6)

8.

Position hose (E) so that free end passes

through left engine shroud. Using fingers

and flat-tip screwdriver, position grommet

(H) over hose and into shroud.

9.

Using 1/2 inch wrench and 1/2 inch socket,

secure each hose with loop clamp.

10. Using 11/16 inch wrench, connect hose

connector (K) to elbow (J) on right

turbosupercharger.

11. Repeat step 10 on left turbosupercharger

to connect hose (E).

Go on to Sheet 6

6-105