TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 198 of 734

POWERPLANT RIGHT BANK OIL COOLER FRAME ANDBRACKETS REPLACEMENT (Sheet 7 of 9)

TM 5-5420-202-20-2

6.

7.

8.

9.

Using alining punch, line up holes for screws(F).

Using 1/2 inch socket with extension or

1/2 inch wrench, install five screws (F).

Using 9/16 inch socket, install capscrew, flat washer, and self-locking nut (G). Use 9/16

inch wrench to keep nut from turning.

Using 1/2 inch socket, install three screws (H) and

cushioned clamp holding timing access cover to frame.

10.

Using alining punch, line up holes for cap-

screws and new self-locking nuts (J).

11.

Using 9/16 inch socket, install six capscrews

and self-locking nuts (J). Use 9/16 inch

wrench to keep nuts from turning.

Go to Sheet 8

6-123