TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

  TM-5-5420-202-20-2 - Page 204 of 734

TM 5-5420-202-20-2
POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (Sheet 4 of 9)
NOTE
It may be necessary to depress three flanges (T) on frame
bottom during removal to clear protruding obstacles on the
engine.
13.
Remove oil cooler support frame (S).
14.
Using 9/16 inch socket with 5 inch exten-
15.
16.
17.
18.
19.
20.
sion and 9/16 inch wrench, remove locknut
(U).
Using 1/2 inch socket with extension, remove nuts (V).
Move two shims and clamp (W) up and remove
bracket (X) and screw (Y).
Remove screw (Y) from bracket (X).
Using 1/2 inch socket and 1/2 inch wrench,
remove screw and nut (Z).
Remove clamp (AA) from bracket (AB) and fuel line.
21.
22.
Go on to Sheet 5
Using 1/2 inch socket with extension, remove nuts (AC).
Remove bracket (AB).
Using 1/2 inch socket with extension, remove four brackets (AD).
6-129


Back to Top