TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

  TM-5-5420-202-20-2 - Page 201 of 734

TM 5-5420-202-20-2
POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (Sheet 1 of 9)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
6-126
Inspection
6-130
Installation
6-131
TOOLS: Ratchet with 1/2 in. drive
5 in. extension with 1/2 in. drive
1/2 in. socket with 1/2 in. drive
5/8 in. socket with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
PERSONNEL:
Two
PRELIMINARY PROCEDURES:
SUPPLIES:
Shims
Self-locking nuts
Go onto Sheet 2
6-126
Alining punch
1/2 in. combination box and open end wrench
3/8 in. combination box and open end wrench
9/16 in. combination box and open end wrench
11/16 in. socket with 1/2 in. drive
4 in. flat-tip screwdriver
Remove powerplant (page 5-2)
Remove engine shroud (page 9-30)
Remove centrifugal fan housing (page 9-64)
Remove engine cooling fans (page 9-55)
Remove engine cooling fan shroud (page 9-47)
Remove engine access covers (left bank) (page 6-112)
Remove engine left oil cooler (page 6-19)
Remove transmission left oil cooler (page 6-38)


Back to Top