TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

  TM-5-5420-202-20-2 - Page 203 of 734

TM 5-5420-202-20-2
POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (Sheet 3 of 9)
8.
Using 1/2 inch socket and 1/2 inch wrench,
remove two capscrews and self-locking
nuts (L).
9.
Remove bracket (M) with harness
attached from frame.
11.
12.
Using 1/2 inch socket with extension,
remove four screws (P).
Using 1/2 inch socket and 1/2 inch wrench
remove screw and self-locking nut (Q).
NOTE
It may be necessary to pull frame
(R) out before oil cooler support
frame (S) can be removed.
Go on to Sheet 4
6-128
10.
Using 9/16 inch socket and 9/16 inch wrench,
remove eight capscrews and self-locking
nuts (N). Use 9/
-
16 inch wrench to keep
nuts from turning.


Back to Top