TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

  TM-5-5420-202-20-2 - Page 211 of 734

TM 5-5420-202-20-2
CYLINDER HEAD AND OIL PAN DRAIN TUBES (LEFT AND RIGHT) REPLACEMENT
(Sheet 2 of 4)
3.
4.
5.
6.
7.
8.
Holding nut with wrench and using screwdriver, disconnect four fuel line clamps (C)
from oil drain line.
Using screwdriver, loosen 16 clamps (D) on eight hoses (E) on each end of drain tube
assembly.
Using cutting pliers, cut lockwire (F) on six bolts (G).
Using 7/8 inch socket, remove six bolts (G), 12 washers (H) and 12 gaskets (J).
Throw washers (H) and gaskets (J) away.
Remove drain tube assembly (K) from engine.
INSPECTION:
1.
Inspect capscrews for stripped threads.
2.
Inspect hose clamps for general serviceability.
3.
Replace defective parts as required.
Go on to Sheet 3
6-136


Back to Top