TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 209 of 734

TM 5-5420-202-20-2

POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (Sheet 9 of 9)

22.

Place mounting bracket (AA) in position and,

using 5/8 inch socket, tighten three screws

(AB).

23.

24.

Position fuel-water separator (AC) to

mounting bracket (AA).

Mounting bracket (AA) is made of

aluminum. Overtightening of cap-

screws (AD) could strip threads.

Using 1/2 inch socket, install four

capscrews, lockwashers, and flat

washers (AD).

25.

Using screwdriver and 3/8 inch wrench, install clamp (AE) if removed.

26.

Install transmission left oil cooler (page 6-43).

27.

Install engine left oil cooler (page 6-22).

28.

Install engine access covers (left bank) (page 6-115).

29.

Install engine cooling fan shroud (page 9-51).

30.

Install engine cooling fans (page 9-57).

31.

Install centrifugal fan housing (page 9-65).

32.

Install engine shroud (page 9-31).

33.

Install powerplant (page 5-14).

End of Tas k

6-134