TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 195 of 734

TM 5-5420-202-20-2

POWERPLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (Sheet 4 of 9)

NOTE

It may be necessary to depress three flanges (L) on frame

bottom during removal to clear protruding obstacles on the

engine.

11.

10. Remove oil cooler support frame (M).

NOTE

Five of the six cooler frame upper brackets are identical and are

mounted the same way.

The sixth bracket (N) is located closest

to the engine flywheel end and requires three shims (P) and an

additional screw and self-locking nut (Q) for proper installation.

Using 9/16 inch socket

nut (Q) securing shims

below shims with 9/16

screw from turning.

Go on to Sheet 5

6-120

with extension, remove

(P). Hold screw head

inch wrench to keep