TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 197 of 734

TM 5-5420-202-20-2

POWERPLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (Sheet 6 of 9)

NOTE

Five of the six cooler frame upper brackets are identical and

are mounted the same way. The sixth bracket (C) is located

closest to the engine flywheel end and requires shims and an

additional screw and self-locking nut for proper installation.

3.

Using 9/16 inch socket with extension, install

shims (C). Hold screw head below shims with

9/16 inch wrench to keep screw from turning.

4.

Using 1/2 inch socket with extension,

install six brackets (D).

NOTE

It may be necessary to depress three flanges (E) on frame

bottom during installation to clear protruding obstacles on

the engine.

5. Install oil cooler and support frame.

Go on to Sheet 7

6-122