TM 5-5420-202-20-2
INTER-TANK SWING CHECK VALVE REPLACEMENT (Sheet 5 of 5) - Continued
11.
Using 7/8 inch wrench, install elbow (K) to right fuel tank.
12.
Using 7/8 inch wrench to hold connector (L) and 1-1/8 inch wrench on connector (M), install
fuel line (H) to elbow (K).
13.
14.
150
16.
17.
18.
Using 9/1 6 inch socket, install bracket (N) to hull using screw, washers, and
lockwashers (P).
Install clamp (Q) to hose (H).
Using 9/16 inch socket on screw (R) and 9/16 inch wrench on nut and washer (S), install
screw (R) and nut (S) through clamp (Q) and bracket (N).
Tighten screw (R) and nut and washer (S).
Install powerplant (page 5-14).
Fill fuel tanks (TM 5-5420-202-10.
End of Task
TA248366
7-242