TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 472 of 734

TM 5-5420-202-20-2

MAIN FUEL FEED HOSE REPLACEMENT (Sheet 2 of 2)

3.

Using two 1/2 inch wrenches, remove screw (E),

flat washer (F), lockwasher (G), and nut (H)

holding clamp (J) and hose (A) to fuel tank

bracket (K).

4.

Remove hose (A) and clamp (J).

5.

Remove clamp (J) from hose (A).

INSPECTION:

1.

Inspect threaded components for thread

damage.

2.

Replace or repair if defective.

INSTALLATION:

1.

Install clamp (A) on main fuel feed

hose (B).

2.

Using two 1 inch wrenches, install

hose (B) to tube assembly (C).

3*

Install main fuel feed hose (B) to

quick-disconnect (D) by using 1-1/4

inch wrench and 7/8 inch wrench.

4.

Using two 1/2 inch wrenches,

secure clamps (A) and (E) to fuel tank

bracket with screw (F), flat washer

(G), lockwasher (H), and nut (J).

5.

Close left top deck grille doors

(TM 5-5420-202-10).

End of Task

7-237