TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 474 of 734

TM 5-5420-202-20-2

INTER-TANK SWING CHECK VALVE REPLACEMENT (Sheet 2 of 5) - Continued

3.

Using 9/16 inch socket and 9/16 inch

wrench, remove screw (F) and nut and

washer (G) holding clamp (H) to bracket

(J).

4.

5.

6.

7.

8.

9.

10.

11.

12.

Remove clamp (H) from hose

Using 9/16 inch socket, remove

screw and washers (K) holding bracket (J) to hull.

Remove bracket (J).

Using 1 inch wrench on fuel hose (L) and 7/8 inch wrench on elbow (M), remove fuel line

(L) from elbow (M).

Using 7/16 inch socket, remove screw and

washers (N) holding clamp (P) to fuel line.

Remove clamp (P) from fuel line (L).

Using 1 inch wrench on fuel line (L) and 7/8 inch wrench on elbow (Q), remove fuel line

(L) from elbow (Q) (located behind left fuel tank rear mount).

Remove fuel line (L).

Using 7/8 inch open end wrench, remove elbow (Q) from left fuel tank.

TA248363

7-239