TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 475 of 734

TM 5-5420-202-20-2

INTER-TANK SWING CHECK VALVE REPLACEMENT (Sheet 3 of 5) - Continued

13.

14.

15.

16.

17.

Using 1-1/16 inch wrench on fuel line (R) and 7/8 inch wrench on elbow (S), remove fuel

line (R) from elbow (S).

Remove check valve (T) and hose (C) from

vehicle and clamp check valve (T) in a vise.

Using 1-1/16 inch wrench, remove hose (C)

from check valve (T).

Using 7/8 inch wrench, remove elbow (M)

and elbow (S) from check valve (T).

Remove check valve (T) from vise.

INSPECTION:

Inspect threaded parts for bad threads. Check tubing for cracks or bends. Replace defective

parts.

INSTALLATION:

1.

Using 7/8 inch wrench, install

elbow (A) to left fuel tank.

2.

Using 1 inch wrench, install

fuel line (B) to elbow (A).

Go on to Sheet 4

TA248364

7-240