TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 334 of 1060

TM 5-5420-202-20-3

ENGINE WIRING HARNESS REPLACEMENT (Sheet 6 of 12)

42.

43.

44.

45.

46.

47.

39.

Using slip joint pliers, remove

electrical connector (AZ) from

ignition unit (BA).

40.

Using 7/16 inch socket, remove two

screws and lockwashers (BB) securing

clamp (BC).

41. Remove clamp.

Using 1/2 inch socket, remove nut (BD)

securing clamp (hidden).

Remove clamp.

Using 1/2 inch socket with extension,

remove screw and lockwasher (BE) secur-

ing clamp (BF).

Remove clamp (BF).

Using spanner wrench, disconnect

electrical connector (BG) from low

voltage protection relay (BH).

Using cutting pliers, cut and remove

two plastic straps (BJ) from cables (BK).

48.

49.

50.

51.

52.

Using 3/4 inch wrench, remove nut and

lockwasher (BL).

Remove three cables (BK).

Using flat-tip screwdriver, remove

screw (BM).

Remove electrical cable (BN).

Remove engine wiring harness from

engine.

Go on to Sheet 7

TA249232

10-291