TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 337 of 1060

TM 5-5420-202-20-3

ENGINE WIRING HARNESS REPLACEMENT (Sheet 9 of 12)

18.

14.

Place wiring harness (A) in position.

15.

Place two clamps (T) in position

around wiring harness (A).

16.

Using 1/2 inch socket with extension,

install two screws and lockwashers (U)

securing two clamps (T) to engine.

17.

Using slip joint pliers, install

connector (V) to fuel-water

separator control (W).

Place two clamps (X)

in position around wiri

harness (A).

19.

Using 1/2 inch socket with extension

install two screws and lockwashers (Y)

securing clamps (X) to engine.

20.

21.

22.

Go

on to Sheet 10

10-294

Using slip joint pliers, install

connector (Z) to fuel solenoid

valve (AA).

Using 7/8 inch wrench install

fuel shutoff lead (AB) to front

of engine.

Place clamp (AC) (hidden) in position

on cable.

Using 9/16 inch wrench, install nut

securing cable and clamp (AC).