TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 338 of 1060

TM 5-5420-202-20-3

ENGINE WIRING HARNESS REPLACEMENT (Sheet 10 of 72)

24.

25.

26.

Place wiring harness (A) in position

along bottom of engine.

Place three clamps (AD) in position

around wiring harness (A).

Using 7/16 inch socket and wrench,

install three screws, lockwashers

and nuts (AE) securing three

clamps (AD) and wiring harness to

engine

27.

Go

on

to Sheet 11

28.

29.

30.

31.

32.

33.

34.

35.

Using slip joint pliers, install

connector (AF) to hour meter (AG).

Connect electrical lead (AH) (CKT 33)

to engine oil temperature transmitter

(AJ).

Connect electrical lead (AK) (CKT 509L)

to engine oil high temperature thermo-

static switch (AL).

Connect electrical lead (AM) (CKT 36)

to engine high oil pressure transmitter

(AN).

Connect electrical lead (AP) (CKT 509L)

to engine low oil pressure switch (AQ).

Place clamp (AR) (hidden) in position

on wiring harness (A).

Using 1/2 inch socket with extension,

install nut securing wiring harness (A)

and clamp (AR).

Place two clamps (AS) in position on

wiring harness (A).

Using 1/2 inch socket, install two screws

and lockwashers (AT).

TA249236

10-295