TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 339 of 1060

TM 5-5420-202-20-3

ENGINE WIRING HARNESS REPLACEMENT (Sheet 11 of 12)

36.

37.

38.

39.

40.

41.

42.

Place wiring harness (A) in position

Place clamp (AU) and clamp (AV)

which is hidden, in position around

wiring harness (A).

Using 1/2 inch socket with extension,

install two screws and lockwashers (AW)

securing two clamps (AU and AV).

Using slip joint pliers, install

connector (AX) to ignition unit

(AY).

Using 1/2 inch socket with extension,

install screw and lockwasher (AZ) secur-

ing ground strap (BA) to engine.

Place clamp (BB) in position around wiring

harness (A).

screw and lockwasher (BC)

securing clamp (BB).

Position connector (BD) in bracket (BE).

Using cross-tip screwdriver and adjustable

wrench, install four screws, lockwashers,

and nuts (BF).

TA249237

Go on to Sheet 12

10-296