TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 395 of 1060

TM 5-5420-202-20-3

HEATER/BASKET HARNESS REPLACEMENT (Sheet 4 of 5)

INSTALLATION:

1.

2.

3.

4.

5.

6.

Position heater/basket harness assembly

into vehicle.

At basket disconnect, install connector

(A) (CKT 401, 402, 405, 407).

Using spanner wrench, tighten nut (B).

Using 7/16 inch socket, install

screw (C), new lockwasher (D), washer

(E), and strap (F) to secure harness

assembly at two locations.

Install clamp (G) on harness

assembly (H).

Using 7/16 inch socket, install

screw (J) and new lockwasher (K) to

secure clamp (G) and wiring harness

ground lead (L) to boss (M).

Go on to Sheet 5

5-57

Change 7

10-296.55