TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 397 of 1060

TM 5-5420-202-20-3

BASKET/GAGE INDICATOR PANEL HARNESS REPLACEMENT (Sheet 1 of 6)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

10-296.56

Installation

10-296.59

TOOLS:

Spanner wrench

7/16 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

7/16 in. combination box and open end wrench

SUPPLIES:

Lockwashers (13 required)

PRELIMINARY PROCEDURE:

Disconnect three ground straps at batteries (page 10-268)

REMOVAL:

1.

2.

Using spanner wrench,

disconnect harness

assembly (A) from

basket disconnect.

Using 7/16 inch

socket, remove

screws (B), lock-

washers (C), and

clamps (D) at

four locations.

Using 7/16 inch

socket, remove top

screw (E), lockwasher

(F), and flat washer

(G) securing strap

(H) at three locations.

Leave bottom screw

Go on to Sheet 2

5-59

Change 7

10-296.57

(J) installed.

3.