TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 252 of 534

TM 5-5420-202-20-4

SMOKE GENERATOR WIRING HARNESS TO BULKHEAD LEAD REPLACEMENT (Sheet 1 of 1)

TOOLS:

Electrical connector repair tool kit

Long nosed pliers (needle nose)

Slip joint pliers

REFERENCE:

TM 5-5420-202-10

PRELIMINARY PROCEDURES:

Remove ground terminals from batteries (page 10-268)

Remove starter harness bulkhead cable disconnect

(page 10-269).

REMOVAL:

1.

2.

3.

4.

Manually pull apart connectors (A and

B).

Using slip joint pliers, unscrew nut (C)

from plug assembly (D).

Using remover, push out pin from position

“A” in plug assembly (D).

Remove lead (E) from nut (C). Throw

lead (E) away.

INSTALLATION:

1.

Thread new lead (E) through nut (C).

2.

Using needle nose pliers, insert lead (E)

pin into position “A” in plug assembly (D).

3.

Using slip joint pliers, tighten nut (C)

onto plug assembly (D).

4.

Install starter harness bulkhead cable disconnect (page 10-270).

5.

Connect ground terminals to batteries (page 10-268).

End of Task

21-10

TA248751