TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

  TM-5-5420-202-20-4 - Page 261 of 534

TM 5-5420-202-20-4
SMOKE GENERATOR INTERMEDIATE FUEL HOSE REPLACEMENT (Sheet 4 of 5)
INSTALLATION:
1.
Install flat washer (A) and elbow (B) into shroud.
2.
Install lockwasher (C) and nut (D) onto elbow (B) to secure elbow to shroud.
3.
Position elbow (B) to face toward right side of engine. Using 3/4 inch wrench to hold
elbow (B), use 1 inch wrench and tighten nut (D).
4.
Connect elbow-to-solenoid fuel hose (E) to elbow (B). Using 7/8 inch wrench, tighten
hose (E) connector to elbow (B).
Go on to Sheet 5
TA248760
21-19


Back to Top