SMOKE GENERATOR INTERMEDIATE FUEL HOSE REPLACEMENT
1.
Using socket, remove three assembled washer screws (A) securing clamps (B) to engine.
NOTE
TM 5-5420-202-20-4
(Sheet 2
of 5)
Use suitable container to catch fuel whenever any
fuel line connection is loosened or disconnected.
Cap all openings to prevent contamination of fuel.
2.
3.
Using 7/8 inch wrench, disconnect intermediate fuel hose (C) from output port of fuel
shut-off valve (D).
Using 7/8 inch wrench, disconnect intermediate fuel hose (C) from elbow (E) in shroud.
4.
Remove intermediate fuel hose (C) and clamps (B) from engine.
5.
Remove clamps (B) from intermediate fuel hose (C).
Go on to Sheet 3
TA248758
21-17