TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 262 of 534

TM 5-5420-202-20-4

SMOKE GENERATOR INTERMEDIATE FUEL HOSE REPLACEMENT (Sheet 5 of 5)

5.

Install three clamps (F) onto intermediate fuel hose (G).

6.

Position intermediate fuel hose (G) along top right side of engine and connect to output

port of fuel shut-off valve (H) and elbow (B) in shroud.

7.

Using 7/8 inch wrench, tighten hose connections.

8.

Using socket, install and tighten three assembled washer screws (J) to secure clamps

(F) to engine.

WARNING

Do not activate smoke generator in a building or closed area or with personnel near.

CAUTION

Always be aware of wind direction and speed when using smoke generator.

9.

Start engine (TM 5-5420-202-10) and run until normal operating temperatures are attained.

Run engine at 1600 rpm and activate smoke generator. Observe operation. Shut off

smoke generator. Shut down engine.

10.

Check smoke generator lines for leaks. Correct as necessary.

11.

Install engine shroud (page 9-31).

End of Task

TA248761

21-20