TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 266 of 534

TM 5-5420-202-20-4

SMOKE GENERATOR FUEL SHUT-OFF VALVE REPLACEMENT (Sheet 4 of 4)

6.

Position assembled fuel shut-off valve (C) and mounting bracket (D) onto engine.

7.

Using 1/2 inch socket, install and tighten two assembled washer screws (G) to secure

mounting bracket (D) to engine.

8.

Connect fuel hose (H and J) to fuel shut-off valve (C). Using 7/8 inch wrench, tighten

hose connectors to shut-off valve.

9.

Be sure that fuel shut-off valve is in open position. (Index line (K) atop shaft of fuel

shut-off valve (C) will be in line with two ports of valve.)

WARNING

Do not activate smoke generator in a building or closed area or with personnel near.

CAUTION

Always be aware of wind direction and speed when using smoke generator.

10.

Start engine (TM 5-5420-202-10) and run until normal operating temperatures are attained.

Run engine at 1600 rpm and activate smoke generator. Observe operation. Shut off

smoke generator. Shut down engine.

11.

Check smoke generator lines for leaks. Correct as necessary.

12.

Install engine shroud (page 9-31).

End of Task

TA248765

21-24