TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 283 of 534

TM 5-5420-202-20-4

SMOKE GENERATOR FRONT ENGINE FUEL HOSE REPLACEMENT (Sheet 3 of 4)

6.

7.

8.

9.

Using socket, remove three assembled washer screws (F) securing clamps (G) to engine.

Using wrench, disconnect smoke generator fuel hose (A) from fuel shut-off valve (B).

Remove smoke generator fuel hose (A) from engine.

Remove three clamps from hose (G) and throw hose away.

INSTALLATION:

1.

2.

3.

4.

Install three clamps (A) onto smoke generator fuel hose (B).

Position smoke generator fuel hose (B) under electrical cables and along edge of shroud

as indicated.

Position clamps (A) along hose (B) and, using socket, install assembled washer screws

(C).

Remove cap from inlet port of fuel shut-off valve (D) and manually

fuel hose (B) to inlet port of fuel shut-off valve (D). Using wrench,

to fuel shut-off valve (D).

connect smoke generator

tighten hose (B)

Go on to Sheet 4

21-41