TM 5-5420-202-20-4
SMOKE GENERATOR TEE-TO-TURBOSUPERCHARGER TUBE ASSEMBLY REPLACEMENT
(Sheet 2 of 5)
NOTE
Replacement of left or right tube assembly is simi-
lar, except as noted.
Replacement of right tube
assembly is shown.
NOTE
Use suitable container to catch fuel whenever any
fuel line connection is loosened or disconnected.
1.
Using 7/16 inch wrench to hold nut (A) and 7/16 inch wrench on screw (B), remove screw
(B), lockwasher (C), and nut (A) securing retaining straps (D), cushions (E), and clamps (F
and G) (two places).
2.
Remove two retaining straps (D), two cushions (E), and clamps (F and G) if present.
NOTE
One clamp is used at inner position, two clamps at outer position
for right tube installation.
No clamps are used on left tube
Go on to Sheet 3
installation.
TA248776
21-35