TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 284 of 534

TM 5-5420-202-20-4

SMOKE GENERATOR FRONT ENGINE FUEL HOSE REPLACEMENT (Sheet 4 of 4)

5.

Manually install tee(E) onto bulkhead elbow (F).

6.

Manually connect fuel water separator hose (G) onto tee (E).

7.

Manually connect smoke generator fuel hose (B) to tee (E).

8.

Adjust positions of tee (E) and hoses (B and G) to avoid interference with other parts.

Using wrench, tighten tee (E) to elbow (F) and hoses (B and G) to tee (E).

WARNING

Do not activate smoke generator in a building or closed area or with personnel near.

CAUTION

Always be aware of wind direction and speed when using smoke generator.

9.

Start engine (TM 5-5420-202-10) and run until normal operating temperatures are attained.

Run engine at 1600 rpm and activate smoke generator. Observe operation. Shut off

smoke generator.

Shut down engine.

10. Check smoke generator fuel lines for leaks. Correct as necessary.

11.

Install upper bulkhead engine access cover (page 17-12).

12.

Install engine shroud (page 9-31).

End of Task

TA248783

21-42