TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 330 of 750

TOOLS:

3/4 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

Slip joint pliers

Hammer

Brass drift

SUPPLIES:

Cotter pins (2 required)

Lockwashers (6 required)

PERSONNEL:

Two

REMOVAL:

1.

Using pliers, remove two cotter pins (A).

TM 5-5420-228-24

FRONT FIXED AND MOVEABLE HOSE ARMOR REPLACEMENT (Sheet 1 of 2)

2.

Using hammer and brass drift, drive pin (B)

from fixed armor (C) and moveable armor (D).

3.

Remove moveable armor (D) by sliding it upward

until bar comes out of groove of boom and

outrigger assembly (E).

NOTE

Have second technician hold fixed armor

(C) while performing step 4.

4.

Using socket, remove four screws (F) and

5.

lockwashers (G).

Remove fixed armor (C).

Go on to Sheet 2

TA251531

3-133