TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 415 of 750

TM 5-5420-228-24

HEU LOCKING CYLINDER HYDRAULIC HOSES “AJ”, “AK”, “AL”, “BZ”

REPLACEMENT (Sheet 2 of 7)

3.

Hold tee fitting (D) with adjustable wrench and use wrench to remove hose assembly “AJ” (B) from tee

fitting (D).

4.

Use socket and ratchet to remove five bolts (E) from clamp (F).

Separate clamp (F) and remove bushing (G) from

hose

assembly “AJ” (B), and remove hose assembly (B).

5.

Hold elbow (H) with adjustable wrench and use wrench to disconnect hose “AL” (J) from elbow (H).

6.

Hold tee fitting (D) with adjustable wrench and use wrench to remove elbow (H) from tee fitting (D). Remove

preformed packing (C).

7.

Use adjustable wrench to remove tee fitting (D) from locking cylinder “EC” (K). Remove preformed packing (C).

8.

Hold tee fitting (L) with adjustable wrench, and use wrench to remove hose “AL” (J) from tee fitting (L).

Go on to Sheet 3

3-204.14

Change 3

K

C