TM-5-5420-228-24
LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL
AUGUST 1985
TM-5-5420-228-24 - Page 424 of 750
TM 5-5420-228-24
HEU EJECTION CYLINDER HYDRAULIC HOSES “AM”, “AN”, “AP”, “AQ”, “AW”, “AX”
REPLACEMENT (Sheet 4 of 8)
14.
Hold elbow (W) with adjustable wrench, and use wrench to remove hose “AW” (V) from elbow (W).
15.
Use adjustable wrench to remove elbow (W) from ejection cylinder (X) and remove preformed packing (C).
16.
Use socket and ratchet to remove eight screws (Y) from clamps (Z). Separate clamps (Z) and remove hose assembly
“AW” (V) from clamps (Z). Remove bushings (AA) from hose “AW” (V).
17.
Hold elbow (AB) with adjustable wrench and use wrench to remove hose assembly “AN” (AC).
18.
Use adjustable wrench to remove elbow (AB) from ejection cylinder (X).
19.
Hold tee fitting (K) with adjustable wrench and use wrench to disconnect hose assembly “AN” (AC) from tee fitting
(K) and remove bushings (AA).
20.
Holding tee fitting (K) with adjustable wrench, use wrench to disconnect hose assembly “AX” (AD) from tee fitting (K)
and remove preformed packing (C).
Go on to Sheet 5
Change 3
3-204.23
AA
AA
Back to Top
