TM-5-5420-228-24
LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL
AUGUST 1985
TM-5-5420-228-24 - Page 428 of 750
TM 5-5420-228-24
HEU EJECTION CYLINDER HYDRAULIC HOSES “AM”, “AN”, “AP”, “AQ”, “AW”, “AX”
REPLACEMENT (Sheet 8 of 8)
19.
Install bushings (V) on hose assembly “AN” (R) and “AW” (H). Position hose “AN” (R) and “AW” (H) into clamps
(W) and use socket and ratchet to install eight screws (X).
20.
Install bushings (Y) on hose assembly “AQ” (N).
Position hose “AQ” (N) in clamp (Z) and use socket and ratchet to
install five screws (AA).
21.
Install bushing (AB) on hose assembly “AX” (M), and “AP” (S). Position hose “AX” (M) and “AP” (S) in clamp (AC)
and use socket and ratchet to install eight screws (AD).
22.
Install bushing (AE) on hose assembly “AM” (T). Position hose “AM” (T) in clamp (AF) and use socket and ratchet to
install five screws (AG).
23.
Bleed hydraulic system (page 3-72).
24.
Check for hydraulic leaks and correct as necessary.
25.
Service hydraulic reservoir as needed (LO-12).
26.
Install front fixed armor (page 3-134).
End of task
Change 3
3-204.27
Back to Top
