6.4 SHIPPING.
Prior to shipment for repair, the Transmitter-Receiver will be packaged as follows:
a. The transmitter-receiver will be removed from the bracket assembly to which it is
attached by four Socket Head Screws, using a 5mm hex key wrench as shown in
Section VI of this manual.
b. It will be wiped clean as stated in the storage paragraph above, and wrapped in ESD
protective bubble wrap.
c. It will be placed in a protective cardboard box and cushioned with bubble wrap to
prevent damage to the antenna face and the electrical connector
during shipment.
d. The bracket assembly and socket head screws will remain with the howitzer to be used
for mounting the replacement antenna when it is received.
6-2
Change 1